DIRECTIONS FOR USE:
Parts should be clean and oil free.
1. Remove protective cap.
2. Turn dial to expose 1/8″ to 1/4″ of material beyond tip.
3. Apply threadlocker to leading edge of male fitting,
covering 5 to 6 threads. Avoid direct contact of tip to
metal surface*.
4. Assemble parts and tighten to recommended torque.
5. Replace protective cap.
*If contact occurs, expose 1/16″ of material and wipe off with a clean towel.
Temperature range: -54°C to 150°C (-65°F to 300°F).
Refer to Technical Data Sheet for complete information.
NOTE: Permatex Threadlocker Gel should not be used
on plastic fittings. Do not use on food contact surfaces.
Avoid food contamination during use and storage.
Permatex’s Medium-Strength Threadlocker Blue is ideal for all nut and bolt applications 1/4″ to 3/4″ (6mm to 20mm). Threadlocker Blue eliminates need for stocking expensive lock nuts and lock washers and locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Threadlocker BLUE is easily removable with hand tools for easy disassembly. The Gel formula provides “liquid-reliability” without drips, globs, mess or waste and is available in convenient dispensing systems: choose GEL TWIST® pin-point applicator or the GEL SQUEEZE® applicator.
(Mil-S-46163A, Type II, Grade N).
1All purpose, medium strength threadlocker
2Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm)
3Locks and seals while preventing parts loosening due to vibration
4Removable with hand tools for disassembly
5Gel formula provides "liquid reliability" without drips, globs, mess or waste
