AVAILABLE AT:
IMPORTANT: READ INSTRUCTIONS CAREFULLY.
Repair only at temperatures between 10°C and 24°C (50°F and 75°F).
1. Ensure rear defogger unit is turned off. Carefully remove wire from tab.
2. Ensure tab is flat and makes complete contact with mounting surface.
3. Open Cleaner/Activator Towelette by pulling both sides of protective packet at the point at the top of package. Fold packet back to use. Towelette is attached to packet, do not remove.
4. Apply activator to lead attachment area on window and tab. Allow activator to dry for 5 min. DO NOT TOUCH mounting surface of glass or tab.
5. Thoroughly knead the adhesive pouch. Cut top of pouch. Apply
one drop of adhesive to center of mounting area.
6. Immediately apply tab to rear window; hold firmly in place for 1
minute. Allow 24 hours to cure before re-attaching wire or activating defogger.
Permatex’s Rear Window Defogger Electrical Conductive Tab Adhesive quickly and easily bonds defogger tab to grid on rear window. Provides a low-cost, high-quality repair for damaged rear window defogger tabs. Complete kit for a quick repair.
1Quickly and easily bonds defogger tab to grid on rear window
2Provides a low-cost, high quality repair for damaged rear window defogger tabs
3Complete kit for a quick repair
4Resistant to extreme weather conditions
