Permatex® 1000® Plus Exhaust Repair Kit

DIRECTIONS:
NOTE: Exhaust system must be cool before applying putty.

1. Wire brush or sand to remove loose rust and dirt. Repair area must be clean.
2. Wrap wet bandage (sticky surface on pipe) around damaged area. Overlap bandage
   at least 1/2 inch. Force bandage into small cracksit molds and conforms easily.
3. Support bandage with wire.
4. Run motor at low speed or idle for 20 to 30 minutes. Bandage will harden to a rock
   hard, super protective shield.