AVAILABLE AT:
While Stocks Last
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
5. Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 27°C (80°F).
Permatex does not suggest adding any solvents, chemicals or fillers to any of our products that will change their formulas, characteristics or the way that the product was designed to perform. Permatex offers many other products that may work for your application.
Permatex Gear Oil RTV Gasket Maker is a specialty gasket maker that is specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases, ensuring a leak-proof seal. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. Gear Oil RTV Gasket Maker seeks and seals leak paths that cut gaskets cannot and can also be used to seal cut gaskets.
