AVAILABLE AT:
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.
2. Cut nozzle to desired bead – gaskets are best formed using a 1/16″ to 1/4″ (2 to 6 mm) bead.
3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to cure for one hour then retighten 1/4 to 1/2 turn.
4. For best results, allow to cure overnight.
5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
Permatex does not suggest adding any solvents, chemicals or fillers to any of our products that will change their formulas, characteristics or the way that the product was designed to perform. Permatex offers many other products that may work for your application.
Permatex Automatic Transmission RTV Gasket Maker is a specialty gasket maker that offers improved transmission oil resistance and good adhesion while retaining flexibility. It is sensor safe, non-corrosive and can be used as a gasket maker or dressing. This non-flammable, non-toxic and low order formulation resists again, weathering and thermal cycling without hardening, shrinking or cracking.
