AVAILABLE AT:
Directions:
1. Remove all previous material from mating surfaces. Permatex Silicone Stripper is recommended for most materials.
2. For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex Brake and Parts Cleaner.
3. Cut Nozzle to desired bead size, 1/16″ to 1/4″ in diameter. A 1/8″ bead is usually sufficient for most applications.
4. Remove cap, puncture tube seal and attach extension nozzle.
5. Apply a continuous and even bead of The Right Stuff 90 Minute to one surface, first tracing the internal areas of the gasket configuration, then all surrounding bolt holes.
6. Assemble parts within 5 minutes while The Right Stuff 90 Minute is still wet. Secure and tighten to recommended torque specs. Re-torque will not be necessary after the product has cured.
Permatex®s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric °Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
1Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
2Sensor-safe, non-corrosive, RTV silicone
3Protects against leaks caused by vibration and thermal expansion
4Meets performance specs of OE silicone gaskets
5Quickly returns vehicle to service in just 90 minutes
