AVAILABLE AT:
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent,
such as Permatex Brake & Parts Cleaner.
2. Cut nozzle to desired bead size gaskets are best formed using
a 1/16″ to 1/4″ (2 to 6 mm) bead.
3. Apply a continuous and even bead of silicone to one surface; surround all bolt holes.
Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone dries in 1 hour, and fully cures in 24 hours.
Allow more time in cold or very dry conditions.
5. Replace cap after use. Clean hands with dry cloth or Permatex Fast Orange Hand Cleaner.
Clean tools with non-flammable cleaning fluid.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
Permatex Ultra Black retains high flexibility and oil resistant properties through use of a patented adhesion system. Ultra Black is sensor safe, low odor, and non-corrosive with resistance to oil, shop fluids, and vibration. This sensor-safe, low odor, non-corrosive formula meets performance specifications of OE silicone gaskets and can be used on high flexibility and high oil resistant applications such as timing covers, transmission pans and oil pans.
1High flexibility and oil resistance
2Sensor-safe, non-corrosive formula
3Resist to powertrain fluids
4Eliminates the need for pre-formed, pre-cut gaskets
5OEM specified and approved for dealership warranty requirements
