AVAILABLE AT:
DIRECTIONS:
1. PROTECT: Work area must be protected from accidental spills.
2. CLEAN: Surfaces must be clean, dry and free of grease and oil.
3. PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).
4. OPEN PACKAGE: Remove syringe. Using a sharp blade, cut off tips of both nozzles.
5. DISPENSE: Depress plunger to dispense resin and hardener. Thoroughly mix resin & hardener on a clean, discardable surface for 2 to 3 minutes until evenly colored.
6. APPLICATION: Apply a small amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes). Remove any excess epoxy immediately.
7. CURE TIME: Usable strength is reached in four hours at 22°C (72°F). Cooler temperatures may require longer set time.
8. CLEAN-UP: Attach nozzle cap and store in molded tray.
NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
Permatex®s General Purpose 5 Minute Gel Epoxy provides the flexibility to reposition before the setting time. The fast setting, two-part adhesive and filler system is specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.
1General purpose epoxy with non-drip gel formula for mess free application
2Blue dye indicator disappears when epoxy is ready to apply
3Permanent strength up to 3000 PSI strength
4Dries clear and no clamping required
5Water resistant, non-shrinking formula
